How To Clean Outdoor Cushions With Oxiclean – Easy Steps
To clean outdoor cushions with OxiClean, check each care label first and test the solution on a hidden spot for fading or texture changes. Mix it according to the package directions, then gently work it into one section at a time with a soft brush or sponge.
Let it sit for the recommended time, then rinse removable covers until the water runs clear. For non-removable cushions, blot with a damp cloth. Air-dry completely, and you’ll find a few helpful tips below.
Check Cushion Labels and Test OxiClean

Before cleaning, check each cushion’s care label for washing instructions and fabric restrictions. Look for symbols or notes that prohibit bleach, soaking, or machine washing. OxiClean contains oxygen-based bleach, so don’t assume every outdoor fabric can tolerate it.
If the label says “dry clean only” or advises against bleach, follow that guidance and choose a suitable alternative.
Next, test OxiClean on a hidden spot, such as the underside or a seam allowance. Apply a small amount according to the product’s directions, then wait the recommended time. Rinse the area thoroughly and let it dry completely.
Check for fading, discoloration, weakened fibers, or a change in texture. If you notice any damage, don’t use OxiClean on that cushion. Repeat the test for each fabric type.
Mix OxiClean for Outdoor Cushions
Once the label and spot test confirm the fabric can tolerate OxiClean, mix the solution according to the product’s package directions.
Check the package for the correct amount of powder and water; formulas can vary, so don’t guess or use extra cleaner.
Choose a clean bucket or basin large enough to hold the amount you need. Measure the water carefully, then add the specified OxiClean dose. Stir until the powder dissolves completely, using a nonreactive utensil if needed.
Wear gloves if the label recommends them, and avoid breathing in dust while measuring. Use cool or warm water only as directed on the package, since the wrong temperature may affect performance.
Prepare only what you’ll use for this cleaning session, and don’t mix OxiClean with bleach, ammonia, or other cleaners.
Keep the solution away from children and pets.
Apply OxiClean to Cushion Covers

Apply the solution to the cushion covers with a soft-bristled brush or sponge, working it gently into the stained areas. Use small circular motions, and avoid scrubbing hard, which can damage fabric fibers or spread dirt.
Treat one section at a time so you can control how much solution you apply. Pay extra attention to visible spots, seams, and areas that collect grime, but don’t saturate the fabric.
Check the care label first, and test the solution on a hidden spot to make sure it won’t cause fading or discoloration. If the fabric looks unchanged after the test, continue across the cover, keeping your strokes even.
Check the care label and test the solution on a hidden spot before cleaning the entire cover.
For removable covers, lay them flat on a clean surface while you work. Let the solution sit for the time stated on the product label.
Rinse Cushions and Treat Lingering Stains
When the solution has finished working, rinse the covers thoroughly with cool water, following the care label’s instructions.
Keep rinsing until the water runs clear and no suds remain. If the covers can’t be removed, use a clean, damp cloth or a gentle stream of water to lift away the cleaner without soaking the cushion’s inner filling.
Check each cover for remaining marks. For a lingering stain, apply a small amount of OxiClean solution directly to the spot, using the product label’s dilution directions.
Gently work it in with a soft brush or cloth, moving from the stain’s edge toward its center to avoid spreading it. Let the solution sit only as directed, then rinse the area thoroughly.
Repeat if needed, but don’t scrub aggressively or mix OxiClean with other cleaners.
Dry Cushions Completely Before Use

After rinsing, press excess water from removable covers without wringing them. Then hang them or lay them flat in a well-ventilated, sunny spot. Turn covers occasionally so both sides dry evenly.
Keep cushions apart to let air circulate, and prop them upright if they’re still damp inside. Don’t put covers back on foam until everything feels completely dry. Trapped moisture can cause mildew and odors.
| Drying method | Best for | Helpful tip |
|---|---|---|
| Hang covers | Removable fabric | Use a sturdy line |
| Lay covers flat | Delicate fabric | Flip them often |
| Stand cushions upright | Foam inserts | Separate for airflow |
Check seams, corners, and the cushion’s center before use. If the weather turns humid or rainy, move cushions indoors near a fan. Avoid high heat; it can shrink fabric or damage foam. Let them dry fully before storing or placing them back on furniture.
Frequently Asked Questions
Can Oxiclean Damage the Color of Outdoor Cushions?
Yes, OxiClean can fade or discolor outdoor cushions, especially if the fabric is dyed, delicate, or not colorfast.
Before cleaning, check the cushion’s care label and test the solution on a hidden spot.
Wait until it dries to judge the result since wet fabric can look different.
Use the weakest recommended mixture, don’t let it sit longer than directed, and rinse thoroughly.
If you notice color transfer, stop and rinse immediately.
Is Oxiclean Safe to Use Around Pets and Children?
OxiClean can be safe around pets and children when you use it exactly as directed, but keep them away during mixing, cleaning, and rinsing.
Store the product securely, and don’t let anyone touch or ingest the powder or solution.
Rinse cushions thoroughly and let them dry completely before allowing pets or children back near them.
Check the product label for specific precautions, and contact Poison Control if anyone swallows it or develops symptoms.
Can Oxiclean Remove Mildew Odors From Outdoor Cushions?
Yes, OxiClean can help lift mildew odors from outdoor cushions, though a stubborn smell may need more than one wash.
Think of that musty scent as a quiet signal that moisture has lingered.
Check the cushion’s care label first, then test the solution on a hidden spot.
Use OxiClean as directed, rinse thoroughly, and let cushions dry completely in sunlight or a breezy spot.
Don’t mix it with other cleaners.
How Often Should Outdoor Cushions Be Cleaned?
Clean your outdoor cushions at least once each season, and more often if you use them frequently or notice dirt, stains, or odors.
In humid, rainy, or dusty conditions, check them weekly and spot-clean as needed.
Brush off loose debris regularly, and clean spills promptly before they set.
At the end of the season, wash the cushions according to their care labels, then let them dry completely before storing them to help prevent mildew.
Can Oxiclean Be Used on Cushions With Waterproof Coatings?
Yes, you can use OxiClean on some waterproof-coated cushions, but check the care label first.
For example, if your cushion’s label allows oxygen-based cleaners, test a diluted solution on a hidden spot. If you see discoloration or a change in water beading, stop using it.
Don’t soak the fabric, scrub aggressively, or use chlorine bleach.
Rinse thoroughly with clean water and let the cushion air-dry completely before using it again.
Conclusion
You’ve checked the labels, tested OxiClean, cleaned the covers, and rinsed away residue. Now let every cushion dry completely before putting it back outside. Trapped moisture can invite mildew and odors.
Don’t rush the final step. A little patience keeps your cushions fresher and more comfortable. Once they’re fully dry, you can enjoy your clean outdoor space with confidence.
Clean well, rinse thoroughly, and dry completely; that’s the simple rhythm that helps your cushions look their best.