How To Clean Washing Machine With Oxiclean – Like New Again
To clean your washing machine with OxiClean, first check your manual and choose a product labeled for washer cleaning. Empty the drum, add the amount listed on the product label, and run the washer-cleaning cycle or hottest, longest cycle.
Wipe the door, gasket, dispenser, and filter, removing trapped grime and debris. If odors remain, run an extra rinse cycle, then leave the door or lid open to dry.
A few simple habits can help keep your washer fresh between cleanings.
Check Your Manual and Choose OxiClean

Before cleaning your washing machine, check its manual for care instructions and any warnings about cleaning products. Your manufacturer may specify which cleaners are safe for your model or identify parts that need special care.
Look for guidance on the washer’s materials, dispensers, and cleaning cycle, and follow any restrictions to avoid damage or voiding your warranty. If the manual isn’t handy, search the manufacturer’s website using your model number.
Next, choose an OxiClean product whose label lists washing-machine cleaning as an intended use. Check its directions and ingredients, and confirm it’s compatible with your washer type, including high-efficiency models.
Don’t assume every OxiClean formula works the same way. Product instructions can vary, so if you’re unsure, contact the manufacturer before using it. Keep the package nearby so you can consult its directions later.
Clean Your Washer Drum With OxiClean
Once you’ve checked your washer’s manual and chosen an OxiClean product approved for machine cleaning, empty the drum.
Add the recommended amount of cleaner to the washer, following the product label and your machine’s instructions. Don’t pour more in than directed; extra cleaner won’t improve the results and may leave residue.
Select the washer-cleaning cycle if your machine has one. Otherwise, choose the hottest, longest cycle that the manual recommends for cleaning an empty washer.
Start the cycle and let it run completely so the solution can circulate through the drum and loosen detergent buildup, odors, and grime. Don’t add laundry or other cleaning products during this cycle.
When the cycle finishes, leave the door or lid open so the drum can air-dry.
If you still notice residue or odors, repeat the cleaning cycle as directed.
Scrub the Door, Gasket, Dispenser, and Filter

After the drum-cleaning cycle, wipe down the washer’s door and gasket. Then clean the detergent dispenser and filter. Use a damp cloth and mild soap to remove residue from the glass and frame.
Pull back the gasket’s folds, where lint and grime collect, and wipe them carefully. Don’t tug or stretch the rubber.
| Part | Cleaning step |
|---|---|
| Door | Wipe glass and frame |
| Gasket | Clean folds gently |
| Dispenser | Remove and wash |
| Filter | Clear trapped debris |
If the dispenser comes out, rinse it under warm water and scrub its compartments with a soft brush. Check your washer’s manual for the filter’s location and removal instructions.
Place a towel beneath the filter to catch drips, then clear lint, coins, or other debris. Refit each part securely. You’ll prevent buildup and help the washer’s components work properly.
Rinse With OxiClean and Check for Odors
If odors linger after cleaning, run an extra rinse cycle to flush out residue. Leave the washer empty, select the rinse-and-spin setting, and start the cycle. This helps remove loosened grime and any remaining OxiClean from the drum, gasket, and dispenser.
Check your product label for directions, and don’t add more cleaner unless the label calls for it.
When the cycle ends, open the door and smell inside the drum. Check the gasket and dispenser, too, since residue can collect in those areas.
If you still notice an odor, wipe visible buildup with a clean, damp cloth, then run another rinse. Don’t mix OxiClean with bleach, ammonia, or other cleaners.
Once the washer smells clean, dry wet surfaces and leave the door open briefly so the interior can air out.
Keep Your Washer Fresh Between Cleanings

A few simple habits can keep your washer fresh between cleanings: remove damp clothes promptly, wipe moisture from the gasket and dispenser, and leave the door or lid ajar to let the interior dry.
After each load, check for lint, hair, or residue around the seal and wipe it away with a soft cloth.
Pull out the detergent drawer occasionally, rinse it, and let it dry before replacing it.
Use the amount of detergent your washer’s manual recommends; too much can leave buildup that traps odors. If you use fabric softener, measure it carefully.
Keep the washer’s exterior and nearby floor dry, too. Don’t leave wet towels or laundry in the drum overnight.
These small steps limit mildew and stale smells, helping your washer stay clean until its next OxiClean cleaning.
Frequently Asked Questions
Can Oxiclean Damage Septic Systems?
OxiClean generally won’t damage a septic system when you use it as directed and in moderate amounts.
Its oxygen-based ingredients break down, but excessive use can disrupt the beneficial bacteria your tank needs to process waste.
Don’t pour concentrated product into drains or use large quantities repeatedly.
Follow the label, spread laundry loads through the week, and avoid combining it with other cleaners.
If your system is sensitive, ask a septic professional.
Is Oxiclean Safe for Colored Laundry?
Yes, you can use OxiClean on colored laundry when you choose a color-safe formula and follow its label.
Check each garment’s care tag, and test a hidden spot first, especially on delicate or unfamiliar fabrics.
Dissolve the powder fully before adding clothes, and don’t pour it directly onto fabric.
Avoid using it on wool, silk, or leather unless the product label specifically permits it.
Never mix OxiClean with chlorine bleach.
Can I Mix Oxiclean With Bleach?
No, you shouldn’t mix OxiClean with bleach. OxiClean’s oxygen-based ingredients can react with chlorine bleach, creating hazardous fumes or reducing cleaning effectiveness.
Use one product at a time, following its label, and never combine cleaners in a bucket, washer, or dispenser.
If you’ve already mixed them, don’t touch or inhale the mixture. Leave the area, ventilate it only if you can do so safely, and contact poison control for guidance.
Does Oxiclean Expire or Lose Effectiveness?
Yes, OxiClean can lose effectiveness over time. The surprise is that it usually doesn’t suddenly become unsafe.
If you store the powder tightly sealed in a cool, dry place, it can remain effective for years.
Moisture is the real culprit because it can trigger the active ingredients to break down or clump.
Check the package for a date, and replace any product that’s damp, hardened, or no longer dissolves well.
What Should I Do if Oxiclean Gets in My Eyes?
If OxiClean gets in your eyes, rinse them immediately with clean, lukewarm water for at least 15 to 20 minutes.
Hold your eyelids open and remove contact lenses if they come out easily. Don’t rub your eyes.
Call Poison Control for guidance, especially if irritation continues.
Seek urgent medical care for pain, blurred vision, or redness.
Keep the product container nearby so you can share its ingredients with medical professionals.
Conclusion
When you clean your washer with OxiClean, you’re clearing more than grime. You’re opening a window for every load to feel fresh again.
Check your manual, clean the drum and hidden parts, then rinse thoroughly and sniff for lingering odors. Keep the door open between washes and wipe away moisture to help prevent buildup.
With a little regular care, your washer won’t just look renewed. It’ll be a clean slate, ready to carry your clothes through another bright cycle.