How Should I Clean My Asics Using Oxiclean – Easy Steps

Check your ASICS’ care label and OxiClean’s instructions before cleaning. Some materials shouldn’t be treated or soaked. Remove the laces and insoles, then brush away loose dirt.

Mix OxiClean with cool or lukewarm water as directed, and test it on a hidden spot first. Clean soles and laces separately, then use a cloth with the solution on the uppers. Wipe away residue with a clean, damp cloth.

Air-dry at room temperature, and follow these simple steps for more guidance.

Check OxiClean’s Safety for Your ASICS

Before cleaning your ASICS with OxiClean, check the shoe’s care instructions and the product label to make sure the cleaner is safe for its materials.

ASICS shoes can combine mesh, knit fabric, synthetic overlays, leather, and foam, and each material may react differently to cleaners.

ASICS shoes may combine several materials, each of which can react differently to cleaning products.

Look for warnings against oxygen-based bleach or soaking, and follow any cleaning limits ASICS provides.

Then read the OxiClean package: formulas and directions vary, so confirm the product suits your shoe’s materials and intended use.

Don’t assume a stain remover is safe just because it’s labeled color-safe.

If either label advises against the cleaner, choose a gentler option.

When labels don’t give a clear answer, contact ASICS or OxiClean customer support before applying anything.

This check helps you avoid fading, weakened fibers, or damage to finishes.

Gather Supplies and Remove the Laces

First, gather your supplies: OxiClean, water, a bowl, and a clean cloth. You’ll want to have everything ready before you begin.

Next, pick a soft-bristled brush—that way, you can protect your ASICS while cleaning.

Don’t forget to remove the laces and set them aside to clean separately.

Gather Cleaning Supplies

Set out OxiClean, a soft brush, a clean cloth, and a bowl of cool water, then remove the laces from your ASICS.

Keep these items within reach before you begin, so you won’t need to pause midway through cleaning.

Check the OxiClean label to confirm it’s suitable for the shoe materials and follow its directions for dilution.

Don’t apply the product directly from the container or use more than the label recommends.

Place the laces aside, away from your work area, and keep them dry until you’re ready to clean them separately.

If your shoes have removable insoles, take them out as well and set them aside.

Choose a spot where spills won’t damage nearby surfaces, and protect the area with a towel or washable covering.

You’re now ready to prepare the cleaning solution.

Choose a Suitable Brush

With your supplies ready and the laces removed, choose a soft-bristled brush that won’t abrade your ASICS’ fabric or mesh. A clean, soft toothbrush works well for small areas, while a dedicated shoe-cleaning brush gives you more reach across the upper.

Check that the bristles bend easily under light pressure. Stiff bristles can snag knit fibers, roughen overlays, or wear down delicate finishes.

If your shoes have different materials, use a separate brush for the outsole so grit and dirt don’t transfer onto the fabric.

Avoid wire brushes, scouring pads, and brushes with sharp or damaged bristles. Before cleaning, inspect your brush and remove any trapped debris. Test it gently on an inconspicuous spot.

The right brush helps you lift dirt while protecting your shoes during the Oxiclean cleaning process.

Remove and Set Aside Laces

Start by removing the laces from your ASICS so you can clean the tongue and eyelets without soaking the fabric unnecessarily. Pull each lace gently through the eyelets; don’t yank or stretch it. Set the pair aside in a small bowl or mesh laundry bag while you prepare your cleaning supplies. Keep them separate from the shoes so dirt won’t transfer back onto the uppers.

Check each lace for fraying or stubborn stains before washing. If the tips look damaged, handle them carefully to prevent unraveling. You’ll clean the laces separately after treating the shoe, then let them air-dry completely before relacing.

Brush Loose Dirt Off Your ASICS

Brush loose dirt from your ASICS before using OxiClean so grime doesn’t spread across the shoe during cleaning.

> Brush loose dirt from your ASICS before applying OxiClean to keep grime from spreading during cleaning.

Work over a trash can or outdoors, and remove the insoles if they’re still inside.

Hold each shoe by the heel and gently tap the soles together to dislodge dried mud.

Don’t bang them hard; force can damage the cushioning or loosen attached parts.

Use a soft-bristled shoe brush or clean, dry toothbrush to sweep dirt from the mesh, seams, and upper.

Brush in short strokes, following the fabric’s direction, and use light pressure around delicate areas.

For packed dirt in the tread, angle the brush into each groove and lift debris out.

Wipe away loosened dust with a dry microfiber cloth.

Check both shoes, including the toe box and heel, before moving on.

Mix a Gentle OxiClean Solution

Once the loose dirt is gone, mix a mild OxiClean solution for your ASICS. Fill a clean basin with cool or lukewarm water, following the temperature guidance on your shoe’s care label.

Add only the amount of OxiClean specified on its package for the volume of water you’re using. Don’t guess or pour in extra; a stronger mixture won’t clean better and may leave residue or affect shoe materials. Stir the water until the powder dissolves completely.

If you’re using an OxiClean product designed for laundry, check its instructions to confirm it’s suitable for the materials in your ASICS.

Keep the mixture gentle, and prepare only enough to clean your shoes. Avoid hot water, which can damage some adhesives and materials.

Set the solution nearby for the next cleaning step.

Spot-Test OxiClean on the Uppers

Before cleaning the full uppers, test the OxiClean solution on a small, hidden area. Choose an inconspicuous spot, such as the inside edge of the tongue or a section beneath a lace.

Make sure the test area uses the same material as the visible upper, since mesh, knit, and synthetic overlays may react differently.

Dampen a clean white cloth with your prepared solution, then gently dab the spot. Don’t scrub or soak it; excess moisture can affect adhesives and padding.

Wait several minutes, then blot the area with a separate cloth dampened with plain water. Let the spot air-dry completely before judging the result.

Check for fading, discoloration, texture changes, or lingering residue. If you notice any damage, don’t use the solution on the uppers.

If the material looks unchanged, proceed cautiously.

Clean the Soles and Laces Separately

Handle the soles and laces separately so you can clean each without soaking the uppers. Remove the laces and set them aside.

Remove the laces and clean them separately from the soles to avoid soaking the shoe uppers.

Brush loose dirt from the soles with a dry, soft-bristled brush, paying attention to grooves where grit collects.

Mix OxiClean with water according to the product label, using a small amount for a manageable cleaning solution.

Dip a cloth or brush into the solution, then scrub the rubber soles gently. Keep the mixture off fabric, mesh, and other delicate shoe materials.

For the laces, place them in a separate bowl of diluted solution and work it through the fibers with your fingers.

Don’t use undiluted OxiClean or mix it with other cleaners.

Once the soles and laces look clean, set them aside for the next step.

Rinse Your ASICS Without Soaking Them

If you want to rinse your ASICS without soaking them, grab a clean, damp cloth.

Just gently blot the cleaner off the fabric, and remember to rinse the cloth whenever it gets dirty.

Try not to soak the shoes—too much water can actually damage them.

Use A Damp Cloth

Use a clean, damp cloth to remove any leftover OxiClean from your ASICS. Wring it out first so it’s moist, not dripping. Gently wipe each treated area, following the shoe’s fabric and stitching.

Rinse the cloth often under clean water, then wring it out again before continuing. This keeps loosened cleaner from spreading back onto the material. Pay special attention to seams and textured sections, where residue can collect.

Use a fresh part of the cloth as it picks up cleaner, and don’t scrub hard; firm pressure may roughen mesh or damage delicate finishes. If you still see suds or feel a slippery film, rinse the cloth and wipe the area again.

Keep water use controlled, and avoid running the shoes under a tap or submerging them. Work patiently until the surface feels clean and no cleaner remains.

Blot Away Cleaner

Once you’ve wiped away the OxiClean, blot the treated areas with a clean, damp cloth to lift any remaining residue. Press the cloth gently against the fabric, then lift it rather than rubbing, which can spread dirt or damage delicate fibers.

Rinse the cloth often and wring it out well so you don’t transfer cleaner back onto your ASICS. Work over each treated spot until the cloth picks up no more suds or discoloration.

Avoid pouring water over the shoes or submerging them. Excess moisture can weaken adhesives and leave the cushioning damp.

Use a fresh, dry towel to press out surface moisture, paying attention to seams and mesh.

Then let your ASICS air-dry at room temperature, away from direct heat, before wearing them again.

Air-Dry Your ASICS Without Losing Shape

After rinsing away the OxiClean, let your ASICS air-dry at room temperature to protect their shape and materials.

Don’t put them in a dryer, near a heater, or in direct sunlight. High heat can weaken adhesives, fade colors, and warp foam.

Keep your ASICS away from dryers, heaters, and direct sunlight to prevent adhesive damage, fading, and warped foam.

Remove the insoles and laces so air can reach every area. Blot excess moisture with a clean towel, then loosely stuff each shoe with white paper towels to help it hold its shape.

Avoid newspaper because it can transfer ink.

Set your shoes in a well-ventilated spot, away from damp floors, and replace the paper towels when they feel wet.

Check the shoes periodically, and give them enough time to dry completely before wearing them. Putting them on while damp can cause discomfort and unwanted odors.

Frequently Asked Questions

Can Oxiclean Damage the Color or Finish of ASICS Shoes?

Yes, OxiClean can fade colors or damage the finish on ASICS shoes, especially if you use a strong solution, soak them, or leave cleaner on too long.

You’ll face greater risk with delicate mesh, suede, leather, printed details, and glued areas.

Check your shoe’s care label first, and test a diluted mixture on a hidden spot.

If you notice color transfer or texture changes, stop and rinse gently with cool water.

How Often Should I Clean My ASICS With Oxiclean?

“Less is more”: clean your ASICS with OxiClean only when they’re visibly dirty, not on a fixed schedule.

Frequent use can fade colors or weaken materials, so spot-clean small stains first and save a full wash for heavier grime.

Check your shoe’s care label, dilute the product as directed, and test it on a hidden area.

After cleaning, rinse thoroughly and air-dry your shoes away from direct heat.

Can I Use Oxiclean on ASICS Shoes With Leather or Suede?

You shouldn’t use OxiClean on leather or suede ASICS shoes. Its oxygen-based cleaners and moisture can discolor, dry, or damage these materials.

For leather, wipe gently with a damp cloth and use a cleaner made specifically for leather.

For suede, brush away dirt with a suede brush, then treat marks with a suede eraser or suede-safe cleaner.

Always test products on a hidden spot first, and follow ASICS’ care instructions for your shoe model.

Is Oxiclean Safe for ASICS With Waterproof or Specialty Coatings?

OxiClean isn’t reliably safe for ASICS with waterproof or specialty coatings; it may weaken water repellency, discolor fabric, or leave residue.

Even one cleaning can affect a coating, so check your shoe’s care label and ASICS’ guidance first.

Test any approved cleaner on a hidden spot, then use a small amount of mild soap and cool water with a soft cloth.

Don’t soak the shoes, scrub aggressively, or apply OxiClean directly.

Air-dry them away from heat.

Can I Machine-Wash My ASICS After Cleaning Them With Oxiclean?

You can machine-wash some ASICS after using OxiClean, but check the care label first; many models aren’t designed for machine washing.

If the label allows it, remove the insoles and laces, place the shoes in a mesh laundry bag, and use cold water on a gentle cycle with mild detergent.

Don’t add more OxiClean, use bleach, or tumble-dry.

Air-dry your shoes away from direct heat to help prevent damage.

Conclusion

With a gentle OxiClean solution, a spot test, and careful rinsing, you can lift dirt from your ASICS without soaking them. Clean the laces and soles separately, then let your shoes air-dry with their shape supported.

Don’t rush the drying process or use direct heat; patience pays off. As the saying goes, “Slow and steady wins the race.” A little care now helps your sneakers look fresher and stay ready for your next run.